My Experience

Wow, has this class been a whirlwind or what. This assignment has at times been incredibly frustrating and stressful especially during the model generation. Even so I still have thoroughly enjoyed myself and not just because i got to create something Harry Potter based. I did not expect my final model to end up looking the way its does. In the beginning I was adamant that I was going to mostly laser cut and made from plywood. I realise now that that was quite narrow-minded. 

My conceptual MP3 player has gone through many developments and iterations to get to the final product. The things I have learnt through this process both good and bad and helpful and difficult shall be useful knowledge for future work.

Each week there has been a development in my design due to either a failure of the previous model, such as my first base sphere getting the LED stuck in the battery slot, which has had to be rethought and altered to generate a more effective solution, or a suddenly more brilliant idea that would enhance my design and make it better, such as the rastering of a pattern onto the surface of Deathly Hallows sign.

All in all it has been a success and I am happy with the work I have produced for this Assignment and my final conceptual MP3 player model. If I could go back do some things differently I would probably do more material exploration at the beginning to figure out all the options I had to work with. I would  also try and manage my time more wisely so I was more on top of the work and having models prepared for class each week. But as far as my designing and generating goes I can't think of anything I would do differently. I am happy with the process I followed and what I accomplished.

Final Conceptual MP3 Player

After everything that has happened, I , by some miracle, have a final conceptual MP3 Player model.

Conceptual MP3 Player

Software: Adobe Illustrator, Autodesk Inventor, Netfab, Up

Materials: Acrylic, Plastic

Digital Fabrication Tools: Laser Cutter, 3D Printer

It looks really awesome in my eyes. I am happy with its aesthetic and the way it disperses the light given off by the LED. Its a shame there was a little warping of the sphere but everything else turned out pretty good. It is a mission to get the LED to slot perfectly down onto the battery but is very rewarding when it works and the LED lights up, just like the puzzle idea that I considered along the pathway of this design.

Week 11: Physical Models

After the whoopsy on Friday let's give it another crack. I chucked my insert model onto the print with Roberts and Maggie. But no. There was a glitch I Robert's file which caused the print to off set at two stages. Unlucky for me, my print partook in the first stage.

Insert

Software: Autodesk Inventor, Netfab, UP

Materials: Plastic

Digital Fabrication Tool: 3D Printer

Deathly Hallows Sign

Software: Adobe Illustrator

Materials: Acrylic

Digital Fabrication Tools: Laser Cutter

Final cut pieces 

Joined with LED in its slot

Sphere Base

Software: Autodesk Inventor

Materials: Plastic

Digital Fabrication Tools: 3D Printer

Speaker representation holes turned out wonderfully, so happy with them, and they good as well

Circle in the middle this time as the two separate holes proved difficult to use 

Bottom of sphere. This time round I printed the model on its side to avoid the scaffolding catastrophe of last time. However the model warped so it is a little ovular now. this would have been alright but now the base insert gets stuck inside the sphere and requires force to place all the way in and to remove it. It also doesn't twist in it bayonet fitting because of this

Bayonet fitting printed well again

Sphere Base

Software: Autodesk Inventor

Materials: Plastic

Digital Fabrication Tools: 3D Printer

Insert finally fully printed at the right size 

pinch-able bit for placing insert in sphere and removing. Not that it works because of the warping of the sphere

Inventor is No More

Monday 26th May rocked up to the Industrial Design Building to gather the last of the screenshots I needed for my blog of my digital models in Autodesk Inventor. To continue my already wonderful day, Inventor is malfunctioning and isn't working. I hope that it would be fixed by Today, Tuesday, hand-in day I got up early to get to Uni to collect what I needed. 

Inventor still isn't working

3D Printer Whoopsy

Friday 23rd May

Micky, Sarah and I came in at 9am to print our final models for presentation on Tuesday. There was only 1/3 of the plastic we needed to print on the role that was currently on the printer. We all had a class to go to so we set up Wendy to change the roll for us. Unfortunately Wendy forgot, understandable as the Fablab was quite busy that day. 

So we only got this much of out prints printed...

Sphere base. Because of the difficulty of the scaffolding within the sphere last time I thought the results might be better if I printed this model on its side.

Base insert. This is my third print for this insert in attempt to the the measurements right for fitting into the base smoothly and not loose or tight. Luckily the printer printed got to print the little knobs on the sides so I was able to test it out in my previous sphere base to see if it works, which it did. this gave me the knowledge that I could print this again without having to worry about it fitting

Week 11: Digital Models

After learning how to accomplish what I wanted to be done, I applied it to my model. After it taking so long for me to apply this method in my tester I chose to generate speaker concept 3 instead of the golfball likeness of speaker concept 2.

Sketch mode for the second cross. Arraying the lines

All the planes I had to create just to form this concept.

Beneath all the foundation, this is what my model looks like

Knowledge Barrier

Inventor

To make the speaker representation the hole ideally would be arrayed from a single point in the centre of the sphere. 

Sadly I had no knowledge of how to do such a thing in Autodesk Inventor.

Not to late to try and learn. 

With Charlie's help we tried different ways of trying to get it done. The array tool didn't work because I'm trying to array around a sphere which has two directions where the array could only do it with one such as a cylinder.

I watched a few tutorials online to see if they would help solve the problem. The were very cool and I'm glad I now know how to use those tools, but they didn't help me solve my problem.

The next day I was in working on my model trying to find an affective way to represent my speaker that I could achieve. Charlie came in and said that I could the "tangent to a point on a curve, plane" tool. He showed me how to do it and we both thought it would work.

Tester:

I tried it out on a cylinder first before attempting to apply it to my own model.

In the sketch put a line out to every point on the sphere that you would like to create a plane on. Get the "tangent to a point on a curve tool" and create a plane at every point. Create a circle at the centre of every plane. Extrude each circle to the centre of the sphere. Yay!!